QA fantomen

The E2E® SBRT Phantom with Removable Spine is a single tool for end-toend commissioning and routine QA. The anthropomorphic, tissue-equivalent thorax phantom contains articulated spine, ribs, and lungs. All materials are suitable for use in kV and MV energies. High Resolution Anthropomorphic... Lees verder

Het multifunctionele en endoscopische fantoom (model ATS 570) is een eenvoudig, uitgebreid middel om beeldvormingssystemen te evalueren over het volledige bereik van klinische beeldfrequenties (2 MHz tot 18 MHz). Het fantoom heeft een combinatie van monofilamentlijndoelen voor afstandsmetingen en weefsel dat doelstructuren... Lees verder

This Computed Tomography Dose Index (CTDI) Phantom by Sun Nuclear (formerly Gammex) is used to measure absorbed doses and monitor scanner output for Dose Index QA with the this phantom. Compliance Maintenance. The CTDI Phantom addresses specifications outlined by the FDA (FDA 21CFR 1020.33) and IEC (IEC 60601-2-44, IEC... Lees verder

Sun Nuclear’s (formerly Gammex) CT Perfusion Phantom is designed to mimic the injection of a contrast bolus into a region of interest allowing you to generate precise time-attenuation... Lees verder

Expanded Image Quality CT QA. Perform robust image quality testing of advanced CT systems with Advanced iqModules from Sun Nuclear (formerly Gammex). This set of 4 modules provides comprehensive testing of high-contrast resolution, low-contrast detectability, slice sensitivity, geometric evaluation, and... Lees verder

The Advanced Electron Density Phantom from Sun Nuclear (formerly Gammex) accurately converts CT values to HU or electron density values. It plays an important role in transitioning from diagnosis to a specific treatment protocol. With the Advanced Electron Density Phantom, ICRU-44 matched tissue equivalence, automation and... Lees verder

To ensure the performance and consistency of your multi-energy scans, Sun Nuclear (formerly Gammex) developed the Multi Energy CT Phantom. The phantom features 19 inserts representing different dimensions and concentrations of iodine, calcium, blood, adipose and other materials of particular interest to Multi-Energy CT... Lees verder

This Advanced CT Performance Assessment Phantom makes it possible to characterize advanced CT features, including Automatic Exposure Control and Iterative Reconstruction, to support protocol optimization and proper dose management for your... Lees verder

Solid Water HE from Sun Nuclear (formerly Gammex) is the next generation of solid water. It is designed for both therapy and imaging with improved uniformity and durability in mind. Solid Water®HE uses new nano-spheres to create homogeneous slabs while mimicking true water within 0.5% across a wide range of... Lees verder

Certified Therapy Grade Solid Water® from Sun Nuclear (formerly Gammex) is a specially developed grade of Solid Water that is manufactured to the most exact quality assurance standards in the industry. It is designed for electron and photon beam measurements including relative ionization, depth dose and... Lees verder

Standard Grade Solid Water from Sun Nuclear (formerly Gammex) mimics the absorption characteristics of water over a wide range of energies. Radiation beam calibration is made easier when using Solid Water. It is designed to scatter and attenuate radiation in the same way as water and can be easily machined to accommodate... Lees verder

The Sun Nuclear (formerly Gammex) model 458 Calibration Check Phantom is an excellent test tool for checking energy output from radiotherapy machines. The phantom contains six cavities with corresponding plugs. This allows for measurements at depth of maximum dose deposition. Gammex technology also provides a custom... Lees verder

Tissue Equivalent Materials from Sun Nuclear (formerly Gammex) allow simple, convenient and accurate simulations for therapy dose determinations. Tissue Equivalent Materials (TEM) have a variety of uses for routine quality assurance and quality control in both diagnostic and therapeutic physics. TEM are user friendly and... Lees verder

The Sun Nuclear (formerly Gammex) 430 Beam Alignment Test Instrument is an instrument used to analyze the alignment of a linear accelerator. It is recommended that beam alignment tests be completed at least once a year to determine problem situations such as: displaced focal spot, asymmetrical... Lees verder

The Sun Nuclear CT Perfusion Phantom with Gammex technology is designed to mimic a perfusion study where traceable material is monitored as it travels through brain tissue. Software that is proprietary to the CT scanner is then used to determine blood flow rates curves and to compare them to known normals.  This provides... Lees verder

The Sun Nuclear Dual Energy Characterization CT Phantom with Gammex technology provides users with the ability to perform Quality Assurance for Dual Energy CT analysis of Iodine and Calcium. The Phantom consists of a Solid Water disk approximately the size of an average pelvis. A matrix of 16 holes in the disk hold... Lees verder

Sun Nuclear’s (formerly Gammex) model 461A Head/ Body CT Phantom provides a set of tools for evaluating CT image quality. The Solid Water composed phantom permits use of the phantom without the need to fill it with water. Head / Body CT Phantom features:. the head module consists of uniform disc of Solid Water... Lees verder

The ACR CT Accreditation Phantom from Sun Nuclear (Gammex) is designed to be an integral part of the American College of Radiology (ACR) CT Accreditation Program.  This voluntary program provides physicians with an opportunity for a comprehensive peer review of their CT facility, personnel qualifications, image quality... Lees verder

Accurately represent scatter effects from widebeam CT scanners with the ACR 464 extension plates from Sun Nuclear (Gammex).  Made from identical solid water materials, these extension plates allow images to begin and end in the same material to eliminate artifacts that may be introduced by scanning in air. ACR CT... Lees verder

The Model 700-QA CT Imaging QA Kit for Atom & CT Dose Phantoms has been designed for evaluating CT performance in anthropomorphic phantoms. Model 700-QA CT Imaging QA Kit for Atom & CT Dose Phantoms features:. can be used in ATOM or CIRS 007TE phantoms 3 soft tissue inserts determines low contrast... Lees verder

The Model 061 Helical CT Phantom has been designed to test scanning protocols to verify that small low contrast lesions will be detected. The phantom contains a CT disk with clinically-relevant spherical targets that are 5, 10 and 20 HU above the background matrix. Model 061 Helical CT Phantom features:. usable on all... Lees verder

The CIRS Model 610 AAPM CT Performance Phantom: a single test object that measures ten distinct CT performance... Lees verder

The Model 026 DEXA Phantom is a quality control tool for Dual-Energy X-ray Absorptiometry (DEXA) instruments, which features an acrylic-embedded calcium hydroxyapatite (CHA)... Lees verder

The Model 062MQA CBCT Electron Density & Image Quality Phantom is an instrument that can be used for image quality assessment and electron density calibration of Cone Beam CT systems integrated in radiation therapy devices. Model 062MQA CBCT Electron Density & Image Quality Phantom features:. position simulated... Lees verder

The Models 090, 091 & 092 MicroMouse & Water Filled Mouse Phantoms have been developed for providing standard of reference for micro CT scanners. Models 090, 091 & 092 MicroMouse & Water Filled Mouse Phantoms features:. solid or liquid filled lung, muscle and adipose water-filled Mouse Phantom contains 11... Lees verder

The Models 18023 & 18043 Xsight Lung tracking Phantom Kit & 4D Planning Phantom have been designed for QA and E2E testing on Cyberknife systems. Models 18023 & 18043 Xsight Lung tracking Phantom Kit & 4D Planning Phantom features:. validated and verified by Accuray (Cyberknife) execute E2E software... Lees verder

The Model 600 3D Sectional Torso Phantom has been designed for providing an accurate simulation of an average torso (22 cm posterior-anterior thickness) for medical imaging and dosimetry... Lees verder

The Model 602 3-Dimensional Torso Phantom has been developed to deliver an accurate simulation of an average male torso for medical imaging applications. The removable organs enable flexibility in the placement of TLD’s, contrast agents, etcetera. The materials used for the phantom provide optimal tissue simulation... Lees verder

The Model 670 & 670S Water Equivalent Mini Phantom is designed for precise evaluation of scatter. The Phantom provides an excellent tissue simulation and opportunity of true dose comparison with the 30 x 30 cm Plastic Water slab phantom. Model 670 & 670S Water Equivalent Mini Phantom features:. water-equivalent... Lees verder

The CIRS Model 800 NEMA PET Scatter Phantom has been designed for NEMA standard NU2-2007. Model 800 NEMA PET Scatter Phantom features:. the cylinder consists of three segments that are assembled during testing test count losses, scatter fraction and random measurements in accordance with NEMA-NU2-2007 foam lined carry... Lees verder

The Model 801-P Virtually Human Male Pelvis Phantom is the most realistic tissue equivalent phantom on the market. The phantom is used for radiation therapy and diagnostic radiology for demonstration applications and imaging dosimetry... Lees verder

CIRS PW Plastic Water is a water equivalent for use with photon and electron beams within 0,5% of true water dose. It is flexible and resists breakage under... Lees verder

The Model 062MA CBCT Electron Density Phantom has been designed for Cone Beam CT Imaging systems. The Phantom is made of Plastic Water and covers geometries for imagers with dimensions of up to 40 cm x 40... Lees verder

CIRS designed this phantom for precise correlation of CT data to electron density of various tissues. The phantom consists of two disks made from Plastic Water® . The disks can represent both head and abdomen configurations. Nine different tissue equivalent electron density plugs can be positioned at 17 different... Lees verder

STEEVTM Phantom. The STEEV Phantom provides the most realistic clinical simulation to perform end-to-end testing of SRS QA systems in the most challenging anatomical regions. The Model 038 STEEV Steriotactic End-to-end Verification Phantom Patient is used for comprehensive testing of stereotactic radiosurgery systems.... Lees verder

Target positioning through imaging guidance is critical for the accurate delivery of radiation treatment. Verifying that all of the imaging, localization and targeting systems are aligned with the true radiation isocenter is crucial. The ISO Cube provides a cost-effective, quick and accurate means of testing radiation... Lees verder

The Model 009 Cube 20 Phantom has been designed for routine QA in RT and IMRT applications where quick set-up and ease of use are important.  The cube is manufactured from Plastic Water DT which mimics the linear attenuations of water within 1% from 50 keV to 15 MeV. Model 009 Cube 20 Phantom features:. MLC QA routine... Lees verder

StereoPHAN is designed for end-to-end commissioning and quality assurance testing on all parts of the SRS process. StereoPHAN inserts and configurations are quickly exchanged with no tools or change in setup. It’s that simple, and that powerful. StereoPHAN Phantom features:. easy setup and assembly;  no tools required... Lees verder

The SRS Profiler (Sun Nuclear) is a refined beam QA device for stereotactic radiosurgery areas measuring several beam parameters in a single exposure. SRS Profiler features:. SunPoint diode detectors (125) streamlines commissioning, acceptance testing and routine QA tests compatible with Accuray CyberKnife support FFF... Lees verder

The CIRS Tissue Equivalent CT Dose Phantoms (model 007TE) accurately simulate the patient’s anatomy in the range of sizes from small infants to large adult patients rendering more accurate and reliable CT dose data. The phantom bodies are made from proprietary epoxy formulations that faithfully mimic the scatter... Lees verder

Each section of the Model 007 & 007A CT Dose Phantoms can provide separate dose information. Users are able to measure minimum, mid-range and maximum values of the nominal tomographic section thickness when performing dose profile... Lees verder

The Model 004 CT Simulator for Bone Mineral Analysis takes into account all the known sources of variance affecting the measurement of density in the vertebral area. The model 004 simulates the average patient’s anatomy in terms of density and shape. Also materials are used which are essentially equivalent to human... Lees verder