DETECTIVE-X Trans-SPEC editie- Ortec - Ametek

Any questions or would you like to order this product? Do not hesitate to contact us

The new application Trans-SPEC is designed according to the standard methods of Detective-X, based on the applications of Detective-X, Sleuth and RAPiD, the type of instruments used to utilize the standard spectrometry system and the standard spectroscopy system. traditional spectrometry standard system. Dispositif d’identification de radioisotopes (RIID) « Gold Standard ».

The DETECTIVE-X-TS is a portable spectrum, complete and high resolution for the measurements in situ.

Advantages of the product:

Grand détecteur de germanium de type P de haute pureté (65 x 50 mm) > 40 % d’efficacité relative
Refroidisseur à cycle Stirling très fiable avec cryostat durci
Signal number treatment and active suppression of bass frequency (LFR)
Conception robuste pour les environnements difficiles (IP65 compliant)
Compact and lightweight (6.98 kg)
Longevity of battery life (8 hours) with the batteries replaced with fuel
Grand écran tactile haute résolution (4.3 pouces), facile à lire en plein soleil
Storage of internal and amovable files (> 100,000 specters)
Controller control via USB, Ethernet and Wi-Fi compatible with ORTEC applications
Mirroring applications for mobile phones, tablets and plate formats for iOS, Android and Windows

Radiation Detector/Cooler

Crystal	High purity P-type Germanium (HPGe). Coaxial construction. Nominal diameter 65 mm x length 50 mm.
Relative efficiency	≥40% typical (ANSI/IEEE 325-1996).
Resolution	≤1600 eV @ 122 keV and ≤2,3 keV @ 1332 keV (FWHM provides optimal settings).
Peak shape	1.9 typical (FWTM/FWHM).
Cryostat and cooler	“Hardened” cryostat, with very reliable and low consumption Stirling cooler. The design of the cryostat is such that the unit can be turned off and back on at any time, without having to wait for a complete thermal cycle (complete warm-up before cooling). This functionality considerably increases system availability during measurement campaigns.
Cooling time	The highly reliable cooler is designed for continuous use. Between measurements, the device is powered by a DC power supply, car battery, or other device. Initial cooling time depends on ambient temperature, but is typically 6 hours at 25°C.

Digital MCA and Data Processor

Digital Low Frequency Noise Cancellation	“LFR filter”.
Conversion gain	Up to 16,000 channels.
Display	4.3″ WQVGA display (480 x 272 pixels), sunlight readable, touch sensitive, can be used with finger or stylus.
Data processor	FREESCALE I.MX535 operates at 1 GHz.
Data storage media	Internal RAM and low profile removable USB drive. The device comes with a USB stick that can store more than 100,000 spectra.
File format	ORTEC CHN and SPC spectrum formats.
Computer and device interfaces	Connections USB, Ethernet TCP/IP v4 via standard RJ45 Ethernet connection (10/100 Mbps, auto-sensing), Wi-Fi (IEEE 802.11a/b/g/e/i/h/j and IEEE 802.11n standards with security access protocols, including WPA and WPA2). The mobile MCB server allows remote control via ORTEC CONNECTIONS based applications, such as MAESTRO, GammaVision, etc. Wisemo is used for device mirroring and app control.

Physically

Maximum overall dimensions	(including handle and Ge detector cap) 39.5 cm L x 16 cm W x 21 cm H (15.5 in. L x 6.25 in. W x 8.25 in. H).
Weight	6.98 kg
Internal battery	2 rechargeable lithium ions. 98 Wh each, nominal. Approximately 8 hours of autonomy at 25°C when the HPGe detector is cold. <4 hours charging time. The internal battery is easy to replace.
External battery	Battery life can be extended indefinitely with the use of optional external battery packs. An external military battery (Model 2590) weighs less than 3.25 pounds and extends its life to >16 hours.
Input power	12 to 17 V DC from battery or DC power supply (universal power supply included).
Energy consumption	Highest during cooling and battery charging: <100 watts. Cold with fully charged battery <35 W.
Operating range	Temperature: –20°C to 50°C. Relative humidity: 95% non-condensing.
Instrument case	IP65 Sealed against dust and water ingress. All perforations are closed with rubber plugs (connectors, memory cards, etc.).

APP FEATURES

Main view of the spectrum: Log/Lin, Zoom, Area of interest, Start, Stop, Clear acquisition and save the spectrum.
Peak/ROI data: centroid, FWHM, start/end channel, gross and net area and count rate.
Configurable spectral marking data: energy, channel, counts.
Configurable status lines: any two of the following: Real Time, Real Time, Real Time Remaining, Real Time Remaining, Battery Time Remaining, Count Rate,
Count rate in ROI.
MCA Controls: ADC conversion gain with high and low level discriminators, coarse and fine amplifier gain, baseline recovery (auto, fast, slow), gain and zero stabilizers, high voltage acquisition presets: real time, real time, return on investment. Peak and full return on investment.
Health status: ±12V, +3.3V, detector temperature, cooler body temperature, cold peak temperature, high voltage.
Security: Password protected user/administrator modes, lock/hide spectrum display during acquisition.
Energy calibration: quadratic adjustment of energy relative to the channel.
External applications: Compatible with all applications based on ORTEC CONNECTIONS such as MAESTRO, MAESTRO-Pro, GammaVision, Isotopic,
Renaissance and the A11 programmer’s toolbox for a wide range of applications.

The DETECTIVE-X-TS is a portable, complete and high resolution gamma spectrometer for in situ measurements. It can be used as a standalone instrument to collect spectra in the field or controlled by a computer connected via USB, Ethernet or Wi-Fi using applications such as MAESTRO-Pro (included), GammaVision, Isotopic and others.

The DETECTIVE-X-TS is physically identical to the popular DETECTIVE-X Radioisotope Identifier, which is considered the “Gold Standard” for critical detection and identification. Like ORTEC’s older TRANS-SPEC-100T and MICRO-TRANS-SPEC instruments, the DETECTIVE-X-TS is specifically intended for use as a more cost-effective, high-resolution portable gamma spectrometer for field measurements rather than for identification automatic isotopic. DETECTIVE-X-TS model includes guaranteed resolution performance and MCA emulation software, but excludes isotope identification applications included with other DETECTIVE-X models (Detective DETECTIVE-X-TS can be upgraded to the DETECTIVE-X 3 MeV and 8 MeV models, as well as a current dose rate calibration.

Downloads

There are 2 downloads available for this product.

Detective X-TS Ortec Datasheet

Detective X-TS Ortec Manual

Please enter your email address to get access to all PEO downloads.