Any questions or would you like to order this product? Do not hesitate to contact us
The new Ludlum L-435 HVL Filter Holder is designed to simplify the routine HVL measurement process. For years the method of attaching the HVL filters to the X-ray collimator involved using quantities of medical/surgical tape. While tape does the job, it also tends to destroy the thinner aluminum filters, particularly the high purity mammography filters.
The Model L-435 HVL Filter Holder eliminates the need to use tape to attach the HVL filters to the collimator housing.
The filter holder consists of a polycarbonate base 24.1 x 24.1 cm (9.5 x 9.5 in.). Permanently bonded to the center of the base plate is an acrylic pocket, open on one side and designed to hold a standard or high purity Al filter set. The polycarbonate material is easily cut with a standard utility knife or sheers to accommodate the two most common collimator track sizes in a given department. The base may also be attached with the hook-and-loop type fastener strips supplied for odd sized collimators. In either case, the filters themselves are protected from damage associated with the application and removal of heavy medical/surgical tape.
Download PDF
You can download the information on this page and the available downloads as one PDF file.
Enter your email address once to gain access to all downloads on the PEO website.
